Beijing Ding Ding Future Technology Co.Ltd
Let our small works lighting big world
Add to Cart
Eltek Rectiverter Indoor cabinet system 6 kVA AC + 12,8-24 kW DC with AC/DC input (CTEJ0843.4000 CTEJ0843.4001 )
Eltek Rectiverter Indoor cabinet system 6 kVA AC + 12,8-24 kW DC with AC/DC input (CTEJ0843.4000 CTEJ0843.4001 )
The Rectiverter indoor system combines both AC and DC feed into one common unit.Simultaneously it provides AC backup power for 230 Vac loads, and 48 Vdc power for DC loads and battery charging.
It’s designed for a protection class of IP20-21. The total DC output can be configured up to 24kW DC load where the limitation for AC load is set to max 6kVA.
Parameters :
| Rectiverter Indoor system | |||||||
| Models / ordering information 6kVA+12,8 kW DC | 6kVA+16,8 kW DC | 6kVA+ 16,0 kW DC | 6kVA+24,0 kW DC | ||||
| Part number CTEJ0843.4000 | CTEJ0843.4001 | CTE20843R1.4000 | CTE30843R1.4000 | ||||
| AC OUTPUT DATA | |||||||
| Voltage (default) / (adjustable range) | 230 VAC / 200 - 240 VAC | ||||||
| Frequency (default inverter mode) | 50 Hz (adaptive) | ||||||
| Frequency (set-able inverter mode) | 50Hz, 60Hz or last synced 50/60Hz (adaptive) | ||||||
| Power maximum (continuous / overload (<15s) ) | 4800 W (6000 VA) / 8000 VA | ||||||
| Current maximum (continuous / overload (<15s) ) | 26ARMS / 34,8ARMS | ||||||
| Current (maximum) Quick trip (20ms) | 120A (6 x nominal) | ||||||
| Hold up (Voltage dips) (before switching to battery) | > 5 ms @ 4800W load | ||||||
| THD | < 1.5 % at resistive load | ||||||
| Output features | Fuse in L and N, Hot pluggable | ||||||
| DC OUTPUT DATA | |||||||
| Voltage (default) / (adjustable range) | 53.5 VDC / 43 - 58 VDC | ||||||
| Power (maximum @nominal input) 12,8 kW 1) | 16,8 kW 1) | 16,0 kW 1) | 24,0 kW 1) | ||||
| Current (maximum @VOUT ≤ 48 VDC) 267 A 1) | 350 A 1) | 333 A 1) | 500 A 1) | ||||
| Hold up time, maximum output power | >10ms; VOUT > 41 VDC | ||||||
| Output features | Short circuit proof, Over voltage Shutdown | ||||||
| INPUT DATA | |||||||
| AC Mains Input Voltage (3 phase Y) | 400 VAC | ||||||
| Surge Protection | OVP Class 2 | ||||||
| AC Current/Phase(at nominal output voltage) (depending on type) 28-58 ARMS 3) | |||||||
| Frequency (default: sync range) | 47-53 Hz | ||||||
| Frequency (set-able: sync range) | 47-53 Hz, 57-63 Hz or both (adaptive) | ||||||
| Power Factor / THD | > 0.99 at 50% load or more / < 3.5% | ||||||
| DC Voltage nominal / extended range (no overload)2) | 45 - 58 VDC / 40 - 45 VDC | ||||||
| DC Current (maximum) | 128 A / 180A during overload (15s) | ||||||
|
Input features | Fuse in L and N, Hot pluggable, Varistor, Hot pluggable AC input individual screw terminals 10 mm2 for L1, L2, L3, N & PE Battery breaker (plug-in type), LVBD default | ||||||
| LOAD DISTRIBUTION 6kVA+12,8kW DC | 6kVA+16,8kW DC | 6kVA+16,0 kW DC | 6kVA+24,0 kW DC | ||||
| LVLD | 300 A | ||||||
| 1 pole AC distribution (L connection on MCB) | 2*2A, 4*6A, 4*10A C | 2*6A, 2*10A C | |||||
| -48 VDC distribution ( priority load ) 4*10A,4*16A,4*32A,4*63A | 4*10A,2*16A,4*32A,4*63A | 4*10A,4*16A,4*32A,4*63A | 4*10A,4*16A,6*32A,6*63A | ||||
| -48 VDC distribution (no priority load) | 2*10A, 2*16A, 2*32A, 2*63A | 2*10A,2*16A,3*32A,3*63A | |||||
| Battery breaker | 3*100 A, D (plug-in) | 3*200 A, D (plug-in) | |||||
| OTHER SPECIFICATION | |||||||
| Control and monitoring (see Smartpack2 datasheet) | Smartpack S panel mount | Smartpack 2 | |||||
| Efficiency >96% (mains mode (AC/AC and AC/DC)), >94% (inverter mode (DC/AC)) | |||||||
| Operating temperature -40 to +55°C (-40 to +131°F), humidity 5 - 95% RH non-condensing | |||||||
| Storage temperature -40 to +85°C (-40 to +185°F), humidity 0 - 99% RH non-condensing | |||||||
| Dimensions[WxDxH] / Weight 600 x 600x 2000mm (23,7 x 23,7 x 78,8”) / 150 kg (551 lbs) | |||||||
| Protection class IP 20 | |||||||
| DESIGN STANDARDS | |||||||
| Electrical safety EN 60950-1, EN 62040-1 UPS safety | |||||||
| EMC ETSI EN 300 386 V.1.6.1, FCC CFR 47 Part 15 EN 61000-6-1 /-2/-3/-4 | |||||||
| Environment ETSI EN 300 019: 2-1 (Class 1.2), 2-2 (Class 2.3) & 2-3 (Class 3.2) RoHS (2011/65/EU) and WEEE (2002/96/EC) compliant | |||||||
| 1) AC load has priority. Maximum available DC output power and current is dependent on instant AC load and AC input voltage; i.e maximum 10,9 kW/18,9 kW at full AC power and nominal input for 230VAC. 2) 40 - 45 VDC: reduced performance - no power boost and increased voltage THD on AC output | 3) If DC voltage is pulled below 43V the input current may increase above this level | ||||||
* The indoor Rectiverter Cabinet with AC &DC feed in one cabinet
Schematic Optional 1
Schematic Optional 2
Schematic Optional 3
Related Products :
Solutions
We provide a complete solutions including site survey, propose professional plan according to customer’s request ,technical support, and maintenance service for Telecommunication Companies in and out of China. We have a competent team and a network of trusted Partners around the world.
FAQ :
1. How do you control the quality?
A:All products before the shipment are simulated usage scenarios, load and full load and current sharing test to ensure the quality of the product.
2. What is your minimum order quantity?
A:There is no minimum order quantity, and one can also be done. The only difference is the price and schedule.
3. Can you introduce your company?
A:I am very honored. I will send you the company’s introduction document later to give you a more comprehensive and direct introduction to our company’s information.
4. What are the advantages of your company?
A:Adequate inventory, and supply guarantee for the subsequent renewal of supply, flexible provided according to different to different needs of customers, providing different solutions.
5. Can i send samples?Report it to me along with the price?
A:You can send samples, the samples are subject to large pride, and the freight needs to be borne by you.
6. How do your company deal with the problem on quality?
A:Our company has been doing this industry for almost 10 years. It has already had a certain reputation. We will carefully analyze it. If it is indeed our quality problem, you can rest assured that it will do things according to the contract agreement and will never let you have any after the worries, our service team will be happy to serve you.
7 What about the quality ?
A:100% original with new package. we will test each item before posted to make sure each item with good quality.
8 How many months for guarantee ?
A: 1 year quality guarantee
9 How to deal with any inferior -quality goods ?
A: Goods can be post by with our charge of post fee for any bad quality products within guarantee time.