Beijing Ding Ding Future Technology Co.Ltd
Let our small works lighting big world
Add to Cart
48V Eltek System Voltage Rectifier Module Smartpack S Panel 242100.415
48V Eltek System Voltage Rectifier Module Smartpack S Panel 242100.415
TELECOM – MOBILE / WIRELESS
· RADIO BASE STATIONS/ CELL SITES
· LTE / 4G / WIMAX
· DISTRIBUTED ANTENNA SYSTEMS
· BROADBAND
TELECOM – FIXED
· FIBER OPTICS / FTTX
· MICROWAVE
· CABLE
· BROADBAND
OFFSHORE AND PROCESS INDUSTRY
· SAFETY AND AUTOMATION SYSTEMS (SAS)
PARAMETERS:
| TECHNICAL SPECIFICATION | ||
| Model | Smartpack S | |
| Part number | 242100.410 | |
| INPUT DATA | ||
| Voltage (nominal) | 10 - 75 VDC | |
| Power Consumption, max - no relays energized max - all relays energized | 3,1W (display sleep) 5,5W (display on) | |
| SYSTEM CONNECTIONS - SYSTEM MONITORS | ||
| Voltage sense, system voltage support | 12 VDC, 24VDC, 48VDC & 60VDC | |
| Current sense, shunt support | 0 - 20mV and 0 - 60mV | |
| Battery fuse monitoring | Auxiliary switch NO/NC, Pull up/down | |
| Load fuse monitoring | Auxiliary switch NO/NC, Diode Matrix Pull up/down | |
| Ground fault detection | Simple bridge circuit detection | |
| SYSTEM CONNECTIONS - LVD CONTROL | ||
| Battery disconnect | 1 (latched or non-latched supported) | |
| Load disconnect | 1 (latched or non-latched supported) | |
| INPUTS AND OUTPUTS | ||
| Digital configurations, Inputs #1-6 | Auxiliary switch: NO/NC | |
| Analog configurations, Inputs #1-4 | Analog Voltage[±0 - 10V] ±4-20mA current measurement (through external 470kΩ resistor) Temperature (for NTC probe) | |
| Analog configurations, Inputs #5-6 | Analog Voltage[0-75V] Symmetry measurement | |
| Output configurations, Outputs #1-6 (alarms) | 6x Relay–Dry/Form C Configurable Normally Open/Closed [Max capacity 75V/2A/60W] | |
| USER INTERFACE | ||
| Local | 2.2” TFT 65k Colour display QVGA resolution 4 keys | |
| Ethernet port | 10/100 BASE-T HP Auto MDI/MDI-X IP protocols: HTTP / SSL, SNMP v3, MODBUS TCP and pComm UDP (PowerSuite) | |
| Serial port | RS-232 and RS-485 on RJ11 connector Serial protocols: MODBUS RTU, Modem Call-Back/SMS reporting (PSTN or GSM), COMLI, CSCP and pComm (PowerSuite) | |
| GENERAL SPECIFICATIONS | ||
| Dimensions (WxHxD) | 72.2 x 43.0 x 220.7mm (2.8 x 1.7 x 8.7”) | |
| Temperature Range | Operating -20 to +65˚C (-40 to 149˚F) | |
| DESIGN STANDARDS | ||
| Electrical safety | UL 60950-1-3rd edition, EN 60950-1-3rd edition | |
| EMC | ETSI EN 300 386 V.1.4.1 EN 61000-6-1 / -2 / -3 / -4 FCC Part 15 Subpart 109 | |
| Marine*) | DNVGL-CG-03391) | |
| Environment | ETSI EN 300 019: 2-1 (Class 1.2), 2-2 (Class 2.3) & 2-3 (Class 3.2) ROHS compliant | |
| 1)Only valid for part number 242100.410M | ||
Eltek Monitoring Comparsion
| CAN Device | Start | End | Numb of Nodes |
| Smartpack | 1 | 14 | 14 |
| Smartpack 2 Basic | 1 | 10 | 10 |
| Smartpack 2 Master | 11 | 14 | 4 |
| Smartnode | 17 | 30 | 14 |
| Battery Monitor | 33 | 46 | 14 |
| Load Monitor | 49 | 62 | 14 |
| Flex Monitor | 65 | 78 | 14 |
| I/O monitors | 81 | 94 | 14 |
| Mains Monitor | 97 | 110 | 14 |
Solutions
We provide a complete solutions including site survey, propose professional plan according to customer’s request ,technical support, and maintenance service for Telecommunication Companies in and out of China. We have a competent team and a network of trusted Partners around the world.
FAQ :
1. How do you control the quality?
A:All products before the shipment are simulated usage scenarios, load and full load and current sharing test to ensure the quality of the product.
2. What is your minimum order quantity?
A:There is no minimum order quantity, and one can also be done. The only difference is the price and schedule.
3. Can you introduce your company?
A:I am very honored. I will send you the company’s introduction document later to give you a more comprehensive and direct introduction to our company’s information.
4. What are the advantages of your company?
A:Adequate inventory, and supply guarantee for the subsequent renewal of supply, flexible provided according to different to different needs of customers, providing different solutions.
5. Can i send samples?Report it to me along with the price?
A:You can send samples, the samples are subject to large pride, and the freight needs to be borne by you.
6. How do your company deal with the problem on quality?
A:Our company has been doing this industry for almost 10 years. It has already had a certain reputation. We will carefully analyze it. If it is indeed our quality problem, you can rest assured that it will do things according to the contract agreement and will never let you have any after the worries, our service team will be happy to serve you.
7 What about the quality ?
A:100% original with new package. we will test each item before posted to make sure each item with good quality.
8 How many months for guarantee ?
A: 1 year quality guarantee
9 How to deal with any inferior -quality goods ?
A: Goods can be post by with our charge of post fee for any bad quality products within guarantee time.